The small butt splice closure is designed for
splicing two loose tube “flat drop” style cables
of 1 to 12 fibers in above ground, below grade
and direct buried applications. The Gator splice
closure uses Tyco Electronics’ well accepted
gel sealing technology to create a sealed
closure system that will fit into confined areas
such as the small “flowerpot” style handholes.

• A galvanized steel mounting frame holds
  the thermoplastic dome and base and the
  cable clamps

• A pole mounting kit is included for mounting
  on traverse pylon struts

• A stainless steel shot-gun protection
  enclosure is optionally available.

• Combines a FOSC 450 D6 Closure with the FOSC   450 Split Base kit

• Split Base design separates to allow wide trays   (approximately 4½inches or wider) into a FOSC 450D   closure (trays this wide are unable to pass through the   regular FOSC 450D base).

• Replaces a damaged FOSC 450D6 base without   disturbing fibers on trays

The Fiber Drop Repair Splice Closure is a taut sheath style fiber closure for use in repairing a single typical “drop” cable of 1 to 12 fibers in above ground, below grade, and direct buried applications. Fiber Drop Repair Splice Closures are available in either heat-shrink or wrap-around Gel sleeve cable sealing technologies.

• In-line closure
• Single cable drop repair
• Small size
• Heat-shrink or Gel cable sealing technologies
• For up to 12 fibers

FTerm UMT Terminals enable a simple and efficient, sealed and hardened, SC/APC drop connection from the network distribution cable to the subscriber. This product is an ideal, cost effective solution for network access points for FTTH applications.

• Available in 4, 6, 8 and 12 port configurations with an integrated   cable stub available in multiple lengths (50 to 2000 feet)
• Designed for use in Outside Plant Fiber Access   Networks
• Pole, Strand, Hand-Hole and Pedestal Mounting   Options
• Radial O-ring gasket and sealed housing ensure weather tight   performance
• Tyco Manufactured Hardened Fiber Optical Adapter (HFOA),
  or FTerm adapter Seals the optical port designed under license
  from Corning Cable Systems to   be compatible with the
  OptiTap™ adapter
• The FTerm adapter reduces time required for subscriber
  connection by utilizing the connector ports for customer drop
  termination
• High performance SC/APC terminations for low loss connections
  – GR-326 tested
• FOSC style fiber tray ensures proper bend radius of stored fiber
• Terminals designed to requirements of Telcordia
   GR-771

FIBRBox splice enclosures offer Tyco Electronics’ proven fiber splice management and organizing performance in a rugged enclosure designed for today’s FTTx applications.

FIBRBox splice enclosures combine a corrosion resistant enclosure, gasketed and grommeted entry points, and the familiar stair-stepped, hinging tray design in a closure that will accommodate 2 to 4 feeder cables and up to 16 drop cables (depending upon drop cable design).

The newest addition to the popular FOSC 450 fiber optic closure line is the FOSC 450 A fiber optic gel splice
closure. This closure is intended for applications where a smaller closure and/or less fiber capacity is required.
It is ideal for Fiber-to-the-Home (FTTH) applications.

• Single-ended thermoplastic closure

• Base and dome sealed with clamp and O-ring system

• One oval entry port for looped cable

• Up to five round ports for single cable entry/exit

• Heat-shrink cable seals

• Available in three sizes with capacity up to 864 fusion   splices

• Compatible with most cable types (single fiber or
   ribbon) and cable constructions (loose tube, central
   core, slotted core)

• Single-ended thermoplastic closure

• Base and dome sealed with clamp and O-ring system

• Six round ports for single cable entry/exit

• Pre-installed gel profile in wrap-around block for cable   sealing

• FOSC splice trays are hinged for access to any splice   without disturbing other trays

• Compatible with most cable types (single fiber or
   ribbon) and cable constructions (loose tube, central
   core, slotted core)

• Uncut or expressed loose tubes can be stored in storage
   baskets

The FOSC 500 AA in-line closure is an environmentally sealed enclosure for use in the outside plant network. It can be used for aerial, underground, or direct buried applications.

The FOSC 600 C and D closures are more than just fiber optic splice closures. They are rugged and versatile platforms that can be deployed anywhere in the outside plant for a multitude of functions including the splicing of any type and size of cable, the housing of connectorized distribution and demarcation points, and the deployment
of optical passives.

FOSC 400 FR fire resistant, fiber optic splice closures are made with a flame retardant material and can be used for
splices in cable vaults and buildings.

Tyco Electronics’ AIR FOSC aerial in-line re-enterable fiber optic splice closure is designed for strand-mounted Fiber-In-The-Loop (FITL) applications.

The FOSC 400 A8 closure provides a compact solution for the emerging Fiberto-the-Home (FTTH) market. The eight round port base provides an excellent platform for single or multi-fiber drops while maintaining the proven reliability of FOSC splice closures.

The FITS FOSC closure is a factory installed termination system for splicing up to four fiber drop cables to a fiber
distribution cable. The FITS FOSC taut-sheath, in-line closure facilitates “preterminated plant” where all fiber
splicing and closure installations are done in a controlled factory environment. Labor and equipment costs are reduced, quality is improved, and the entire system can be tested before it goes to the field. The cost of deploying fiber in the local loop can be significantly reduced.

• Compatible with any common cable construction

• Meets the same sealing specification as XAGA 1650   series copper closures (based on heat-shrink technology)

• Can store expressed loose buffer tubes and stranded   fiber with no additional components

• Single-ended metal closure

• Four round ports for single cable entry/exit

• Heat-shrink cable seals

• Suitable for use above ground

• Wide range of accessories available

• Compatible with optical grounding wires and fiber-optic   cables