Dat@Term terminal blocks are terminations designed for high speed data. Based on the gel and IDC technologies that have made Tyco Electronics’ sealed connections the industry standard, the Dat@Term terminal blocks adds a new level of simplicity and efficiency.

Tool-less toggles terminate and lock 22-26 AWG conductors and seals the connection against corrosion.

Dat@Term terminal blocks are suitable for a wide variety of applications. Contact your Tyco Electronics sales representative for more information.

Dat@Term terminal bunching/commoning blocks are designed for a wide range of applications. Based on the same technologies that have made Tyco Electronics’ sealed connections the industry standard, the bunching/commoning blocks add a new level of simplicity and efficiency in the network!

Available in 1- and 2-line configurations, each block incorporates 8 rotating toggles for toolless, pair-at-a-time IDC terminations that connect, protect, and environmentally gel seal 22 to 26 AWG insulated solid conductors. The block uses an incorporated slotted mounting foot to mount easily into a wide range of locations and applications.

Tyco Electronics offers a variety of accessories that help adapt the Dat@Term terminal block for many applications.

• Test Clips – Single Pair

• Test Clips – 25 and 50 Pair Test Shoes

• Transfer Clips: 1-Pair and 5-Pair

• Special Circuit/Priority Service Markers

• Replacement Toggles

DTerminator 3 terminals are high density, environmentally sealed terminal blocks that provide toolless operation for Pedestal, Pole Mount, and Strand Mount applications.
Subscriber connections can be made on 19 to 26 AWG solid copper conductors without stripping the insulation or requiring any special adapters. Patented GelGuard sealing gel technology provides superior sealing performance in environmentally demanding terminal applications.

Two versions are available- Standard and SwitchTerm terminals. SwitchTerm terminals enable disconnecting and
re-connecting the downstream (field side) conductors of each pair by simply flipping a switch. This feature also allows maximum utilization of previous deployed copper.

QUIET FRONT cross connect modules are designed to connect telephone distribution lines with individual drop wires. These blocks are capable of terminating 18.5 AWG (1.02 mm) and 22-24 AWG (0.65-0.50 mm) wires. The QUIET FRONT cross connect modules will terminate two wires of either size at each post. The use of a new user-friendly, rotary insulation displacement design provides precise termination in 1/4" turn of the lug. The
contact design also protects the drop wires from nicks during the termination process.

The DTerminator 2 ICT/ICX/ICP integrated closure terminal is a strand-mounted, free breathing, aerial closure terminal intended for new construction and rehabilitation,
providing mechanical strength, security, and environmental protection for your splice. The kit contains four main components: two gel end-pieces, one central housing, and one DTerminator 2 terminal block. The product is available in two splice chamber sizes: A and B with any block size up to 25 pair.

The DTerminator 2 PMT/PMX/PMP terminal
systems are pole/wall-mounted terminals
utilizing RaychemÕs revolutionary GelGuard
technology to environmentally protect the
wire connections. Three models have
been designed.

The DTerminator 2 PMT block offers enhanced
characteristics in a rugged aluminum housing
with a swing-out door. A hinged plastic version
is also available for the PMT, PMX and PMP
terminal systems.

The DTerminator 2 PMT/PMX/PMP terminal
systems are pole/wall-mounted terminals
utilizing RaychemÕs revolutionary GelGuard
technology to environmentally protect the
wire connections. Three models have
been designed.

The DTerminator 2 PMT block offers enhanced
characteristics in a rugged aluminum housing
with a swing-out door. A hinged plastic version
is also available for the PMT, PMX and PMP
terminal systems.

The DTerminator 2 PTB/PTX/PTP pedestal-mounted
terminal block systems utilize Tyco Electronics’ revolutionary GelGuard sealing gel technology to environmentally protect the wire connections. Three models have been designed.

The DTerminator 2 PTB terminal block offers enhanced characteristics, with a versatile mounting system suitable for attachment to any pedestal faceplate. This model cannot be protected.

The DTerminator 2 SCT/SCX/SCP strand-mounted
aerial terminal is intended for new construction and rehabilitation, providing mechanical strength, security, and environmental protection for wire connection. The SCT terminal consists of two main components: a central housing and a DTerminator 2 terminal block.

Tyco Electronics’ unique IIDC (inverted insulation displacement connector) accommodates 1.02 - .51mm (18 - 24AWG) subscriber wires without stripping the
insulation or using special tools. Wires can be connected and disconnected many times, even after prolonged exposure to extreme temperatures.

The DTerminator 2 XCX/XCP pole, strand, or wall mount closure terminal is intended for new construction and rehabilitation, providing mechanical strength, security, and environmental protection for your connection. The kit consists of two main components: a plastic housing and a
DTerminator 2 6-pair cross connect block.

Tyco Electronics’ unique IIDC (inverted insulation displacement connector) accommodates 1.02 - 51mm (18-24 AWG) subscriber wires without stripping the insulation or using special tools. Wires can be connected and disconnected many times, even after prolonged exposure to extreme temperatures.

The TermSeal terminal lug cap is a re-enterable sealing device that protects terminal block lugs against damage from high humidity, corrosion, and many other environmental influences. This fast and easy method of encapsulation demonstrates exceptional performance, even in severe environments.

TermSeal terminal lug caps consist of a polymeric cap filled with encapsulating gel. This encapsulating gel conforms and seals to the lug and wire, yet pulls away cleanly and can be reused.